| 1. | A more difficult problem is the quantitative description of the secondary breakup of the initial spray by high velocity combustion gas .
一个更困难的问题是关于高速燃气使初始喷雾二次破裂的定量描述。 |
| 2. | Constant pressure combustion gas turbine
定压燃烧式燃气轮机 |
| 3. | Constant volume combustion gas turbine
等容燃烧式燃气轮机 |
| 4. | Requirements for combustion gas turbine driven cylindrical rotor synchronous generators
燃汽轮机驱动的圆柱转子同步电机的技术要求 |
| 5. | Atmospheric pollution . method of weight determination of solid particles entrained by combustion gases
大气污染.燃烧气带有的固体颗粒物的重量测定方法 |
| 6. | Collecting the combustion gases before they enter the non - burning shaft via the crossover channel
在他们进入到非燃烧窑筒之前通过交叉通道收集燃烧气体。 |
| 7. | After igniting the motor , the combustion gas coming into the debond cavity may expand the debond cavity , and make an additional combustion area and lead to larger load
发动机点火后燃气进入脱粘腔,使脱粘腔变形并获得额外的燃烧面积,从而导致更强的载荷。 |
| 8. | This allows a parallel flow heating in one shaft , i . e . the parallel flow of limestone and combustion gases , and a regenerative preheating of the limestone in the second shaft by the mixture of combustion gases and cooling air
这就允许在一个窑筒里有并流燃烧，即石灰石和助燃空气的并行流动，而在另一个窑筒里是助燃空气和冷却空气的混合气体对石灰石的再生预热。 |
| 9. | Using cfx4 . 3 code with finite difference and simplec methods , the temperature distribution of ladle lining baked at different preheating temperature of combustion gas was studied numerically and experimentally
利用计算流体力学软件cfx4 . 3 ，采用有限差分方法和修正的速度压力耦合算法simplec ，计算了某厂蓄热式钢包内衬的温度分布，重点分析了不同气体预热温度下钢包内衬温度的变化规律，并进行了实验验证。 |
| 10. | The results show that the thermodynamic properties of propellant combustion gas products have an important effect on its expanding power , and the correlation between conventional energy parameters such as impetus , potential energy and its power capability is not identical
结果表明，发射药燃气产物的热力学性质对其膨胀做功具有较大的影响，传统的火药力或潜能能量参数与做功能力之间的关系并非完全一致。 |
